12mm Low Iron Toughened Glass Calculator | Free Radius, Holes, Polishing, Delivery**

0 out of 5

£269.50 - £539.00 / per m2 £215.60 - £431.20 / per m2 inc VAT

  • Buy bespoke cut Low Iron Toughened Glass Cut to Size | 12mm thick
  • Opt: Ritec Self Cleaning, Shaping, Sandblasting, Layer Printing, Back Painting
Panels over 2.5m2 must be Priced as over size panels and may incur extra costs. please contact us.
Laminated Glass - Minimum Charge 0.5m2 (per panel)
Toughened / Float Glass - Minimum Charge 0.3m2(per panel)
Glass Thickness: 12mm
Glass Type: Clear Low Iron Toughened
Total Area (sq m)
Product Price

Buy Glass UK can shape your glass to nearly any shape FREE shapes are squares & rectangles, standard glass shapes are raked rectangles, circles, ovals, triangles but we can CNC shape glass to specification.

4 Holes up to and including 20mm are Free of charge.
Please add a description of hole sizes and positions further down or submit a technical drawing.

Circular holes over 20mm, and under 50mm, are charged at £5+VAT per hole
Please add a description of hole sizes and positions further down or submit a technical drawing.
We will produce a technical drawing for you to confirm.

Corner Radius (upto 5mm) is Free, over 15mm radius please select cnc shaping from the shaping options (top)

For special requirement please use the Details box near the bottom of this form

(max file size 256 MB)

If you would like to describe the position of holes, cutout positions, radius corners etc please provide additional info here.
We’ll be in touch to confirm these details and we’ll send you a technical drawing over for approval.


Buy Glass supplies Pilkington Optiwhite, 12mm Low Iron Toughened, which is glass with a lower content of iron eliminates the greenish colour of standard float glass. The glass can be used almost anywhere traditional float glass has been used, particularly where the light is increased, solar power reduced and the crystal clear appearance is needed.

12mm Low Iron Toughened glass is suitable for the removal of the colour of glass to accentuate application or decorative treatment. Tight tolerances provide limited variance in colour edges over different sizes and thicknesses of glass.

Buy Glass 12mm Low Iron Toughened glass is 4 to 5 times stronger than annealed glass of the same 12mm thickness and is best designed for the most important applications for protection.

Because of its increased strength, Low Iron Toughened Glass allows architects and builders far greater scope in their use of glass in buildings.

12mm Low Iron Toughened glass is produced to BS EN 12150, the product is a a soda lime silicate glass intended to be used in buildings and construction work.

12mm Low Iron Toughened Glass is manufactured by subjecting cut to size panes of glass to a heating and cooling treatment whereby high compressive stresses are set up at the surfaces with balancing tensile stresses in the centre.

The high compressive surface stresses give the glass its increased strength i.e toughened glass.

When / if broken 12mm Low Iron Toughened glass will break into lots of small usually blunt pieces making it much safer than annealed (untoughened) glass which breaks in to large usual sharp pieces.

What are the uses for Super Clear Low Iron Toughened Glass?

  • Facade Glass
  • Glass Doors
  • Architectural Glazing
  • Handrails & Balustrade Glass
  • Lifts & Elevator Glass
  • Shelves
  • Shop Windows
  • Skylights
  • Kitchen Splashback Glass
  • Pool Surround Glass
  • Partitioning Glass
  • Table Top Glass
  • Shelve Glass
  • Aquarium Glass

You, the specifier, are responsible for checking with building control and/or other regulatory bodies to ensure that 12mm Low Iron Toughened and the fitting are suitable for your specific project. We are a supply only company.

Additional information

Dimensions 1000 × 1000 × 12 mm
Glass Type

Glass Thickness

Safety Glass

Min Handling

Max Handling

Unit Price Base Measurement

Unit Price Measurement

Edge Polishing

BuyGlass.Co pride ourselves on creating a beautiful end product. With edge polishing there are a few things to consider before you purchase & when evaluating the glass you receive.

Depending on the process used, the edge finish can vary slightly between panels. All BuyGlass.Co edge polishing is finished to an exceptional standard and fully QC'd before release.

If you require a uniform finish across all pieces then please contact us after the order is placed.

Otherwise we will process the polishing using whichever process we choose, and although generally this would mean all glass uses the same polishing technique there are certain times when we may use various methods.

Glass Corners

Corners are supplied, as standard, with dubbed corner. If you require unfinished or radius corner please let us know.

Laminated Glass

We use multiple methods for creating laminated glass. CIP, SGP, PVB & EVA are totally different processes which produce very similar results. CIP however, due to the injection process, has a faint area at the perimeter which can be seen upon closer inspection.


If you would prefer any particular method then you must let us know prior to production or else, at our discretion, we will use any method.