17.5mm Low Iron Toughened Laminated Glass Calculator | Free Radius, Holes, Polishing, Delivery**
£330.00 ex VAT per m2
- Buy bespoke cut Low Iron Toughened Laminated Glass Cut to Size | 17.5mm thick
- FREE EDGE POLISHING
- FREE HOLES**
- FREE RADIUS CORNERS
- FREE DELIVERY**
- Opt: Ritec Self Cleaning, Shaping, Sandblasting, Layer Printing, Back Painting
Toughened & Plate Glass has a minimum chargeable panel size of 0.3m2 per panel.
Please call 03335773578 or email your specifications to Sales@buyglass.co to get correct pricing for panels under the minimum.
orders of panels under the minimum will be billable or fully refunded
|Glass Thickness: 17.5mm|
|Glass Type: Clear Low Iron Toughened Laminated|
- Additional information
- Glass Guide
Buy Glass supplies Pilkington Optiwhite, 17.5mm Low Iron Toughened Laminated, which is glass with a lower content of iron eliminates the greenish colour of standard float glass. The glass can be used almost anywhere traditional float glass has been used, particularly where the light is increased, solar power reduced and the crystal clear appearance is needed.
17.5mm Low Iron Toughened Laminated glass is suitable for the removal of the colour of glass to accentuate application or decorative treatment. Tight tolerances provide limited variance in colour edges over different sizes and thicknesses of glass.
Buy Glass Toughened glass is 4 to 5 times stronger than annealed glass of the same thickness and is best designed for the most important applications for protection. Nevertheless, close consideration must be given to its use at high level because if it is broken the glass will break into small pieces and will no longer bear a load or act as a barrier. Consequently, not completely framed toughened glass is likely to break off its fixings.
The safe solution is BuyGlass.Co’s 17.5mm Low Iron Toughened Laminated glass which consists of sheets of Low Iron toughened safety glass bonded together with a tough plastic interlayer improving protection and safety as well as preserving pieces of glass in the event of breakage.
What are the uses for Low Iron Toughened Laminated Glass?
- Roof glazing Glass
- Canopy Glass
- Balustrade Glass
- Partitioning Glass
- Floor Glass
- Lifts & Elevator Glass
- Well Cover Glass
- Free standing barrier Glass
- Full height barrier Glass
- Balcony Glass
- Mezzanine safety barrier Glass
You can also combine BuyGlass’ 17.5mm Low Iron Toughened Laminated with BuyGlass Acoustic Inter-layer, BuyGlass Thermal Inter-layer, BuyGlass Color Inter-layer & BuyGlass coating products to add acoustic, solar, thermal insulation and thousands of potential colours.
You, the specifier, are responsible for checking with building control and/or other regulatory bodies to ensure that 17.5mm Low Iron Toughened Laminated and the fitting are suitable for your specific project. We are a supply only company.
|Dimensions||1000 × 1000 × 17.5 mm|
|Unit Price Base Measurement|
|Unit Price Measurement|
BuyGlass.Co pride ourselves on creating a beautiful end product. With edge polishing there are a few things to consider before you purchase & when evaluating the glass you receive.
Depending on the process used, the edge finish can vary slightly between panels. All BuyGlass.Co edge polishing is finished to an exceptional standard and fully QC'd before release.
If you require a uniform finish across all pieces then please contact us after the order is placed.
Otherwise we will process the polishing using whichever process we choose, and although generally this would mean all glass uses the same polishing technique there are certain times when we may use various methods.
We use multiple methods for creating laminated glass. CIP, SGP, PVB & EVA are totally different processes which produce very similar results. CIP however, due to the injection process, has a faint area at the perimeter which can be seen upon closer inspection.
** WE GENERALLY USE PVB **
If you would prefer any particular method then you must let us know prior to production or else, at our discretion, we will use any method.