Patternedthickness to confirm4mm Low-E Toughened (TGH) / 4mm Xenon cavity / Patterned / obscure glass
Panel 1, inside: 4mm Low-E Toughened (TGH). Panel 2: Patterned / obscure glass. Cavity: 4mm. Gas requested: Xenon.
U-value requires supplier confirmation for the selected patterned pane and complete unit. The supplier confirms the value and whether its declaration is for the glass unit or whole window.
Choose the pattern and pane thickness in the configurator to calculate the overall unit thickness. The supplied ±1mm overall-thickness guideline must be confirmed by your supplier.
Configure your heritage unit
Choose your glass pattern
See the pattern before you choose
Select a sample to compare its design and privacy level.
You can also leave the pattern for your supplier to advise.
29 patterns shown · privacy 1 is least obscure, 5 is most obscure.
4mm inside pane + 4mm cavity + patterned second pane — thickness to confirm. The supplied ±1mm overall-thickness guideline needs supplier confirmation and is separate from fitting clearance.
U-value: Supplier to advise.
U-values are indicative baseline guides for the selected Low-E unit, cavity and gas. Manufacturers use different brands, coatings and unit constructions, so actual U-values may differ. Confirm the declared U-value for your exact unit with your chosen supplier before ordering. No improvement is assumed for a different second pane.
Sizes may be left blank. Contact details are collected once in the basket. This is a request for supplier advice and quotation, not approval for manufacture.
Finished size limits — 4mm Low-E Toughened (TGH) / 4mm Xenon cavity / Patterned / obscure glass. Maximum-size guide (width × height): 600 × 600mm or 500 × 1000mm. Keep each pair intact; no rotation or combining maxima. Minimum-size guide with toughened glass: width 150mm × height 250mm. Outside-guide sizes use the supplier-review request.
Online entry range: 1–20,000mm for each dimension; this is a form limit, not a manufacturing range. Unknown sizes can be left blank in Simple mode. Raw-sheet formats do not set finished-panel limits.
Unit 1
Supplier quotation required
Sizes, availability, charges, performance and guarantees will be confirmed by the supplier.
Patterned glass in a heritage sealed unit
Request made-to-measure heritage double glazing combining 4mm Low-E Toughened (TGH) on the inside, a 4mm Xenon gas cavity and Patterned / obscure glass as Panel 2. This separate patterned sealed-unit make-up is available to discuss with a specialist supplier.
Choose a textured, etched or opal pattern for the second pane of a heritage window unit. The gallery shows manufacturer samples and records the design, thickness and direction with your enquiry. The supplier confirms safety treatment, availability, unit compatibility and any conservation appearance requirements.
Your selected glass build-up
For this Patterned / obscure glass product, the selected 4mm cavity and Xenon gas give a U-value for the supplier to confirm. Panel 1 is 4mm Low-E Toughened (TGH); Panel 2 is Patterned / obscure glass. The total unit thickness is calculated in the configurator when the patterned pane thickness is selected. Confirm your rebate depth, sightline, spacer colour and the declared thermal performance with the supplier before ordering.
U-values are indicative baseline guides for the selected Low-E unit, cavity and gas. Manufacturers use different brands, coatings and unit constructions, so actual U-values may differ. Confirm the declared U-value for your exact unit with your chosen supplier before ordering. No improvement is assumed for a different second pane.
Supplier-dependent sizing and charges
The information below is a starting guide supplied from one manufacturer. It is not a universal manufacturing limit or an automatic price calculation. You can still request advice outside these sizes.
- Recorded 4mm cavity maximum-size alternatives: 600 × 600mm or 500 × 1000mm. Keep each width × height pair intact; do not combine maxima or assume rotation.
- Where a pane is toughened, the supplied minimum-size guide is 150 × 250mm. Supplier and product restrictions can differ.
- Some suppliers use a 0.30m² minimum chargeable area. The quote must state the actual basis and charges.
- The supplied shaping guides are +25% for straight-sided shapes and +50% for curves or non-regular shapes. These are supplier dependent, are not applied automatically and are not added together.
Sightline and spacer options
5.5mm and 7mm sightlines are requested with Black or White warm-edge spacers. The 8.5mm sightline is requested in Black or Silver; the exact spacer construction still needs confirmation. Hollow rigid or aluminium alternatives must be checked against the particular supplier’s range.
Description and application images
4mm Low-E Toughened (TGH) / 4mm Xenon cavity / Patterned / obscure glass, requested to your finished sizes. Describe the application, dimensions, shape and processing in the planner. The supplier confirms the exact specification, manufacturing limits and quotation.
Suitable uses and specification limits
Discuss slim glazing for an existing heritage or conservation project. Provide the frame, rebate, appearance requirements and any known property restrictions.
Recorded size pairs, thickness guidance, shaping charges and indicative U-values below are supplier-dependent. They do not establish availability, whole-window performance or permission for the property.
Available shapes and glass options
This product starts with the listed inside pane, second pane, cavity and gas. The heritage planner includes sightline and spacer colour requests; patterned products use the shared manufacturer sample picker.
Current product: 4mm Low-E Toughened (TGH) / 4mm Xenon cavity / Patterned / obscure glass. Keep the glass type, treatment and thickness with every panel.
Choose options in the planner →Edge finishes and fabrication choices
Sealed-unit edges form part of the glazing system. Confirm spacer, edge seal and frame rebates rather than selecting a decorative sheet edge. Request bars and decorative details per unit in the planner; other fabrication needs supplier review.
Include the face, orientation and drawing reference for each panel. The quotation must confirm the processing, tolerances and charges before manufacture.
Measuring instructions
- Record finished sealed-unit width, height, quantity and overall thickness. Mark the inside and outside faces and keep the existing frame or rebate measurements separately.
- Record each pane and cavity if known. Overall thickness includes every pane and cavity; do not estimate an unknown build-up from a photograph.
- Photograph the full window, frame/rebate and any identifying markings. Agree clearances, setting blocks, edge cover and fitting responsibilities with the supplier.
Not sure of the finished size? Use a simple enquiry and request measuring or fitting advice. A photograph alone is not a manufacturing drawing.
Typical raw stock-sheet formats
Primary manufacturers make raw sheet glass. Fabricators and processors cut, treat and assemble it for individual orders. Supply may pass through distributors; direct-sales arrangements vary.
Official manufacturer information: Pilkington, Fuyao Glass, AGC Group, Guardian Glass, Saint-Gobain. These are non-exhaustive industry examples, not preferred suppliers. Product ranges and supply arrangements vary.
These are typical formats for raw glass before cutting and processing. Availability depends on your supplier’s raw-glass source and the exact product, finish and thickness.
| Format | Raw sheet size |
|---|---|
| Machine size (standard) | 3210 × 2250 mm or 3210 × 2550 mm |
| Split size | 3210 × 2000 mm Custom split layouts may be derived from a 3210 mm ribbon; confirm the layout with your supplier. |
| Jumbo size (PLF) | 3210 × 6000 mm |
Raw sheet size is not a guaranteed orderable finished-panel size. Cutting allowances, machinery capacity and orientation, processing and handling can restrict the finished dimensions. Keep the product’s own width × height pairs and safety limits.
These formats do not establish availability for mirrors, laminates, insulated or heritage units, patterned glass, fire-rated glass or other specialist products. Their product-specific sizes and restrictions still apply.
Compare the quoted price alongside the confirmed specification, relevant quality documentation, traceable provenance and consistency. Agree shipping and lead times, handling and replacement arrangements, regardless of where the glass is made.
Enter the finished glass sizes you need in the planner. Your supplier confirms the raw material and what can be cut, processed, handled and supplied for that specification.
Drawing and photograph upload
Include an overall view, close-ups of supports or frames, and a drawing with panel references, dimensions and orientation.
PDF, JPG, PNG or WebP · up to 6 files per product · 5MB per file. Files stay in this browser on this device and are available with this product in your basket. Supply them separately to your supplier when requested. Keep your originals; clearing browser data removes these copies.
Updating local files…
Get a price or supplier quote
Configure your panels or describe what you need. Your supplier confirms glass, processing, VAT, delivery and any measuring or fitting charges in the quotation.
Build your basket to request a supplier quotation. Adding a request is not an order.
Delivery, collection and fitting information
Delivery
Your supplier confirms production, sourcing and delivery for the exact heritage unit make-up.
Give your actual project postcode and access details. Agree packaging, unloading, handling equipment and the delivery date with your supplier.
Collection
Request factory collection where available. Wait for readiness confirmation and agree a time, loading arrangements and suitable transport before travelling.
Measuring and fitting
Ask for supply only, glass with fittings, or supply and installation. Measuring, removal of existing glass, fixings and fitting need an agreed scope and price.
FAQs and care advice
Does selecting a unit give the window an energy rating?
The supplier must confirm performance for the exact unit and, where relevant, the complete window system. Pane, gas and cavity choices alone do not assign a whole-window rating.
Can I request a quote before I know all the sizes?
Yes. Start with the intended use and what you already know. Ask for help measuring or specifying, then approve the final dimensions and drawing with the supplier.
Are shaping, processing and fitting included in the price?
The supplier quotation confirms each included item and any separate charge. Planner choices are requests for review; they do not establish a final price.
How should I care for this glass?
Follow the unit and frame supplier’s instructions for cleaning glass, coatings, seals and drainage. Report damage or moisture between panes to the supplier. Agree any replacement work before disturbing the glazing.